Roland RT-MicS Sound Module & Microphone Integrated Drum Trigger From Japan. For drummers who want to extend the sound of their acoustic drums, the RT-MicS is a great choice.
The RT-MicS is a drum trigger that combines a sound source module, microphone, and mixer to easily add electronic sounds to acoustic drum sounds by simply attaching it to a snare or tam. Pre-loaded with eight practical tones (WAV files), including snare sounds and hand claps that enhance the raw sound. You can adjust the volume of the preloaded tones and the volume of the built-in microphone, respectively, and you can also replace the preloaded tones with your favorite tones using special software.
A drum trigger that any drummer can easily introduce. ¦Easily add electronic sounds to snare and tam sounds. An integrated drum trigger and sound source module, the RT-MicS comes preloaded with eight practical tones. You can add effective tones to the backbeat, such as hand claps, TR series sounds, and tambourines, or you can augment your usual snare sound by layering snare sounds that emphasize the attack.¦Using a PC, you can replace preloaded tones with original tones. Up to 10 seconds of WAV files per type can be captured by RT-MicS. Using the dedicated software "RT-MicS Wave Sender, " you can import WAV files from a PC via USB, replace preloaded tones with original tones, and rename files. ¦Built-in snare and tam sound microphones. The RT-MicS has a built-in microphone for picking up snare and tam sounds.
Connect an effector such as a delay or reverb between the MIC OUTPUT jack on the RT-MicS and the mixer/amplifier, allowing you to actively create sound in your own hands. The RT-MicS is equipped with MIC OUTPUT, which outputs the built-in microphone sound, and a MIX/ELEC OUTPUT jack, which allows you to switch between the electronic sound only output or the built-in microphone sound + electronic consonant mix output with a switch. The volume balance of the built-in microphone and electronic sounds can be easily adjusted with a dial on the side. The electronic sound can be muted by pressing and holding the button on the top of the unit. ¦Compact and easy to set up.Installing the RT-MicS is pretty easy. It is detachable to and from snares of various hoop shapes without special tools. The sensitivity of the head sensor, which picks up signals to produce electronic sounds, is controlled by a SENS dial on the side of the unit. It can also be battery-powered, allowing smooth setting without the need to run a power cord.
And on the RT-MicS Wave Sender, you can set it to trigger only when you hit the rim. You can beat the sound with the head for acoustic sound and the rim for RT-MicS built-in electronic sound. User samples = 8 max, sound length = 10 seconds per sample (both stereo and mono). ¦File formats that can be captured.WAV (44.1 kHz, 16/24 bit). WAV, AIFF, MP3, AAC, Apple Lossless. 7 segments 1 digit (LED). MIX/ELEC switch, MIC VOLUME dial, ELECTRONIC VOLUME dial, POWER switch. MIC OUTPUT jack (standard type), MIX/ELEC OUTPUT jack (standard type), Micro USB jack (USB Micro B type), DC IN jack.
Alkaline battery (9V type), AC adapter. ¦Battery life in continuous use. It depends on the battery specification, capacity and usage.Height from top rim to head = maximum 13 mm, rim thickness = maximum 12 mm, width from inside rim to tip = maximum 5 mm (for inward-facing hoops). Mass: 400 g (including battery). International Buyers - Please Note. Thank you for your understanding. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Synthesizers".
The seller is "nagato-24" and is located in this country: JP. This item can be shipped worldwide.